Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Nissan Micra

Model: Nissan Micra K13 - Years 2010-2017
Part: Battery

The information provided in this guide will show us how to disassemble and replace the battery of the Nissan Micra vehicle. First, we open the car's hood and start by disconnecting both battery terminals (positive and negative); then we unscrew the battery bracket screw located at the bottom, in order to remove it from its housing, as shown in the video. At this point, we install the new battery, of the correct type and with the same amperage; we make the electrical connection and secure it properly, then start the engine!

Posted on 25 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Nissan Micra key
How to replace the battery of the Nissan Micra key
Nissan Micra (2017-2024 / K14) Today we will explain how to replace the battery of a Nissan Micra vehicle remote control. To replace the battery, we need to press the side of the r…
How to replace the battery of the Nissan Micra
How to replace the battery of the Nissan Micra
Nissan Micra (2010-2017 / K13) Below we will see the steps that will allow us to disassemble and replace the engine battery of the Nissan Micra, following the instructions below. F…
Where is the battery fuse of the Nissan Micra located?
Where is the battery fuse of the Nissan Micra located?
Nissan Micra (1992-2002 / K11) When a car battery stops working, the causes can be different: discharged battery, damaged battery, or damaged fuse. In case the fuse is the problem,…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos