Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Front bumper

See other generations:
Video tutorial

Below we will see the main instructions on how to disassemble and replace the front bumper of the Nissan Rogue. First, we open the hood of the car and start unscrewing all the fixing screws we find on the top and bottom of the front bumper; we then unscrew the additional screws we find on both sides of the fenders, as shown in the video.

At this point, we release the bumper on the sides until we completely remove it, replacing it with the new one; we replace any damaged clips and screws, reassembling and properly fixing the front bumper!


Posted on 11 May 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Nissan Rogue?
How to Remove the Front Bumper of the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To remove the front bumper of the Nissan Rogue, open the hood to access the rivets at the front of the engine compartment, above the bumper. Once the…
How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. …
How to Remove the Front Bumper of the Nissan Rogue
How to Remove the Front Bumper of the Nissan Rogue
Nissan Rogue (2008-2015 / S35) If you want to proceed with removing the front bumper on this vehicle, you can refer to the instructions provided below and the video tutorial. First…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos