Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Nissan Rogue?

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of the Nissan Rogue, open the hood to access the rivets at the front of the engine compartment, above the bumper. Once these rivets are removed, detach the ones inside the wheel wells by moving the panels and unscrewing the underlying screws.

The last screws to remove will be located at the bottom of the bumper: when all these screws are removed, you can detach the bumper and replace it with a new one, securing it with all the screws and rivets removed earlier.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. …
How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the main instructions on how to disassemble and replace the front bumper of the Nissan Rogue. First, we open the hood of the car an…
How to disassemble the front bumper on the Nissan Rogue?
How to disassemble the front bumper on the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In this tutorial we can see how to remove the front bumper on the Nissan Rogue, a very simple and quick operation. First of all, we open the hood, th…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos