Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Front bumper

See other generations:
Video tutorial

Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. First, we open the hood of the car and start removing all the screws and plastic clips that we find above and below the bumper; we unscrew the additional screws on both sides of the front wheel arches, as shown in the video.

At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; we reassemble and properly fix the front bumper!


Posted on 16 March 2025 by ScegliAuto


Related tutorials

How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the main instructions on how to disassemble and replace the front bumper of the Nissan Rogue. First, we open the hood of the car an…
How to Remove the Front Bumper of the Nissan Rogue
How to Remove the Front Bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this tutorial, you will learn how to remove the front bumper of your Nissan Rogue. Start by opening the hood and using a screwdriver to remove the…
How to Remove the Front Bumper of the Nissan Rogue?
How to Remove the Front Bumper of the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To remove the front bumper of the Nissan Rogue, open the hood to access the rivets at the front of the engine compartment, above the bumper. Once the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos