Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Nissan Rogue

Model: Nissan Rogue T32 - Years 2014-2020
Part: Front bumper

In this tutorial, you will learn how to remove the front bumper of your Nissan Rogue. Start by opening the hood and using a screwdriver to remove the clips located in the grille. Next, unscrew the wheel well screws on both the right and left sides to move the fender trim and access the bumper screws. Now continue by unscrewing the screws located under the bumper and removing all the clips. Return to the grille and use a tool to remove it from its place. Then, begin detaching the bumper starting from the fender side and finally remove the two rivet clips located near the headlights.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. …
How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the main instructions on how to disassemble and replace the front bumper of the Nissan Rogue. First, we open the hood of the car an…
How to Remove the Front Bumper of the Nissan Rogue?
How to Remove the Front Bumper of the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To remove the front bumper of the Nissan Rogue, open the hood to access the rivets at the front of the engine compartment, above the bumper. Once the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos