Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Nissan Rogue?

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

In this tutorial we can see how to remove the front bumper on the Nissan Rogue, a very simple and quick operation. First of all, we open the hood, then we remove all the indicated plastic rivets located on the upper side of the grille.

We then unscrew the bolts accessible from the wheel arches using a 10mm socket wrench, remove the various lower rivets, and, gripping it from one of the two ends, separate the bumper from the frame. At this point, all that remains is to disconnect the connectors of the fog lights, if present, and install the replacement if needed.


Posted on 15 April 2025 by ScegliAuto


Related tutorials

How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the main instructions on how to disassemble and replace the front bumper of the Nissan Rogue. First, we open the hood of the car an…
How to Remove the Rear Bumper from a Nissan Rogue
How to Remove the Rear Bumper from a Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below are the instructions that will allow you to remove and replace the rear bumper of the Nissan Rogue. First, move to the back of the vehicle and …
How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos