Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Nissan Rogue

Model: Nissan Rogue T32 - Years 2014-2020
Part: Rear bumper

Below are the instructions that will allow you to remove and replace the rear bumper of the Nissan Rogue. First, move to the back of the vehicle and start unscrewing all the lower screws of the bumper, which are also located on both sides of the rear wheel wells. Next, detach the plastic side clips by removing all the clips, as shown in the video. At this point, pry on the sides of the bumper to detach and remove it for repair or replacement; reassemble and securely fasten the rear bumper!

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of the Nissan Rogue?
How to Remove the Rear Bumper of the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To remove the rear bumper of the Nissan Rogue, loosen the screws located inside the two rear wheel wells. Once these screws are loosened, remove thos…
How to remove the front bumper of the Nissan Rogue
How to remove the front bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front bumper of the Nissan Rogue, in simple steps. …
How to Remove the Front Bumper of the Nissan Rogue
How to Remove the Front Bumper of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this tutorial, you will learn how to remove the front bumper of your Nissan Rogue. Start by opening the hood and using a screwdriver to remove the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos