Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the TPMS warning on the Nissan Qashqai.

Model: Nissan Qashqai J11 - Years 2014-2022
Part:

The following steps will show us how to reset the tire pressure warning on the Nissan Qashqai; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So we get into the car and start the instrument panel; then we enter the car settings menu and go to the tire pressure option, as shown in the video. We then follow the guided procedure to confirm and reset the TPMS sensors, thus resetting the warning light on the instrument panel!

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the TPMS Warning on the Nissan Qashqai
Resetting the TPMS Warning on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today, you will learn how to reset the tyre pressure warning on the Nissan Qashqai. Before resetting the TPMS sensors, ensure that all four tyres are…
Reset tire pressure warning on the Nissan Qashqai
Reset tire pressure warning on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today's information will allow us to reset the tire pressure warning on the Nissan Qashqai; before zeroing and recalibrating the TPMS sensors, it is …
How to reset the tire pressure light on the Nissan Qashqai
How to reset the tire pressure light on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) The instructions in this guide will show us how to reset the tire pressure light on the Nissan Qashqai; before resetting the TPMS sensors, it is nece…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos