Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to remove door panel and mirror on nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Door panel
Operation: How to remove door panel and mirror on nissan Qashqai

We perform the disassembly of the door panel (front right) and mirror on Nissan Qashqai: disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle (after having removed the plastics). Remove the plastic covering near the handle, unscrew the screws left on the door panel and detach the clips from it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power supply cables and the opening cable). We remove the plastic covering the mirror and unscrew the locking pins of the same.


Posted on 3 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos