Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter in the Nissan Altima?

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, we can see how to replace the cabin filter in the Nissan Altima, an extremely simple and quick operation. First of all, go to the passenger side, then position yourself under the dashboard, grab the panel located at the joint between the central tunnel and the dashboard itself and unclip it. Next, locate the long rectangular door, open it by unlocking the clip and remove the old filter.

At this point, all that remains is to clean the housing from any dirt residue, insert the replacement filter and reassemble everything following the reverse procedure.


Posted on 25 October 2025 by ScegliAuto


Related tutorials

Replacement of the fuel filter of the Nissan Altima
Replacement of the fuel filter of the Nissan Altima
Nissan Altima (1998-2001 / L30) These short and simple instructions will show us how to disassemble and replace the fuel filter of the Nissan Altima. First, we open the hood of the …
How to replace the alternator of the Nissan Altima
How to replace the alternator of the Nissan Altima
Nissan Altima (2007-2012 / L32) Below we will see the main instructions on how to disassemble and replace the alternator of the Nissan Altima. First, open the hood of the car and st…
What is the Fuse Diagram for the Nissan Altima?
What is the Fuse Diagram for the Nissan Altima?
Nissan Altima (2013-2018 / L33) If any devices in your Nissan Altima suddenly stop working, first check the status of the corresponding fuses, which are detailed in this video. Loca…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos