Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the lock/unlock buttons on a Nissan Rogue remote control

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

Let's see how to program the remote control of a Nissan Rogue without a scanner: enter the interior of the car, close all the doors, including the rear hatch and the front hood; we must have all the remotes we want to program at hand, including the old and working one. Often, completing the procedure, all unprogrammed remotes are deleted from the car's memory and must be reprogrammed together.

Insert the physical key into the ignition switch and then remove it completely: repeat this 6 times in rapid succession.

After the sixth time, the four turn signals will flash twice: the car has entered programming mode. Turn on the ignition, and press any button on the remote you want to program: the hazard lights will flash once, confirming that the remote has been recognized and programmed.

To exit programming mode, simply remove the key from the ignition switch.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Nissan Rogue
Replacing the Key Fob Battery for the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this short video, see how to disassemble and replace the battery in the key fob for the Nissan Rogue. First, take your key fob and remove the phys…
How to Replace the Key Fob Battery for the Nissan Rogue
How to Replace the Key Fob Battery for the Nissan Rogue
Nissan Rogue (2008-2015 / S35) Discover in this brief and simple guide how to disassemble and replace the battery in the key fob for the Nissan Rogue. First, take your key fob and …
How to Replace the Key Fob Battery on a Nissan Rogue
How to Replace the Key Fob Battery on a Nissan Rogue
Nissan Rogue (2021-2026 / T33) Today, you will learn how to replace the battery in the remote key fob for a Nissan Rogue. The model we will use is a CR 2032. Move the lever on the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos