Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a Nissan Qashqai J11.

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Service warning light

Let's see how to reset the service light on a Nissan Qashqai J11: turn on the ignition, press and hold the "OK" button on the steering wheel until we see the "wrench" icon start to flash. At that point, release the button, press it again quickly, and now the display will show the pre-set maintenance interval. If we want to confirm this value, we simply turn off the ignition: the reset is complete. If we want to change the interval - either up or down - we use the directional arrows to increase or decrease the value. Once the desired mileage is selected, we just wait for it to stop flashing and stabilize.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Nissan Qashqai J11
How to Reset the Service on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see how to reset the service on a Nissan Qashqai J11: with the ignition on, operate the buttons located on the left side of t…
How to reset the service light on the 2016 Nissan Qashqai J11
How to reset the service light on the 2016 Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) To manually reset the service indicator light on your Nissan Qashqai J11 (2016), you need to carefully read the following guide and follow the steps …
Service reset on a Nissan Qashqai J11
Service reset on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this very short tutorial, you will see the entire procedure necessary to reset the service on a Nissan Qashqai, model j11 produced from 2014 to 20…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos