Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : How to remove the cabin air filter of a Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Cabin air filter
Operation: How to remove the cabin air filter of a Nissan Micra

Let's see how to remove the cabin air filter of a Nissan Micra. We open the glove compartment and unhook the compartment limit arms (if present), then unscrew the tightening screws of the same with a screwdriver. After carrying out the operations mentioned above: unscrew the side screws in the glove compartment and extract the plastic door and the glove compartment from the dashboard. Remove the black plastic cap and slide the air filter out of the housing as shown in the video. We insert the new filter and reassemble all the components of the glove compartment as we disassembled previously.


Posted on 9 November 2023 by ScegliAuto



Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) In today's video tutorial we will see how to remove and replace the cabin filter of a Nissan Micra second series. First we go inside the car, on the
How to replace the cabin air filter in Nissan Micra
Nissan Micra (2017-2024 / K14) In today's video we see how to perform a very simple maintenance operation on the Nissan Micra currently on the market. Specifically we will see how
How to change the cabin filter on a Nissan Micra
Nissan Micra (2002-2010 / K12) Let's see how to change the cabin air filter (also called pollen) on a Nissan Micra. We need to access under the glove box. In a rather awkward posit

Other guides that may interest you

    Frequently Asked Questions

    • Micra 2017-2024 - Where is the cabin filter located on Nissan Micra K14? Read Answer
    • Micra 2010-2017 - How to replace the cabin filter on Nissan Micra K13? Read Answer
    • Micra 1992-2002 - Where is Nissan Micra k11 air conditioning filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos