Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the anti-collision sensor of the Nissan Rogue Sport.

Model: Nissan Rogue Sport MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Video tutorial

This short guide will show us how to disassemble and replace the collision sensor of the Nissan Rogue Sport, following the instructions below. First, let's open the hood of the vehicle and begin to disassemble and remove the front bumper by unscrewing all the fastening screws; we will find the collision sensor mounted on the bracket in front of the radiator, as shown in the video.

At this point, let's disconnect the sensor's electrical wiring and unscrew the screws to remove it and replace it with the new original one; finally, we will reassemble the front bumper!


Posted on 9 January 2026 by ScegliAuto


Related tutorials

How to disassemble the central ventilation nozzles of the Nissan Rogue Sport
How to disassemble the central ventilation nozzles of the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) In this guide we will see the instructions that will allow us to disassemble and eventually replace the central air vents of the Nissan Rogue Sport, …
How to Change the Engine Oil of the Nissan Rogue Sport
How to Change the Engine Oil of the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) Today, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Nissan Rogue Sport. First, lif…
Removing the Front Bumper of the Nissan Rogue Sport
Removing the Front Bumper of the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) In this brief guide, we will go through the steps to remove and replace the front bumper of the Nissan Rogue Sport. First, open the hood of your vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos