Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Bumper of the Nissan Rogue Sport

Model: Nissan Rogue Sport MK 1 - Years 2017-2024
Part: Front bumper

In this brief guide, we will go through the steps to remove and replace the front bumper of the Nissan Rogue Sport. First, open the hood of your vehicle and start removing all the clips and screws found at the top of the bumper; then remove the lower bumper cover, as shown in the video. At this point, remove the side trim of the fender and unscrew the wheel well screws on both sides; gently detach the bumper from the side until it is completely removed, applying the reverse procedure for reassembly!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Rogue Sport (2017-2024 / MK 1) Today, we will see in this video tutorial how to remove and replace the headlights on the Nissan Rogue Sport. First, open the hood of your car and st…
Nissan Rogue Sport (2017-2024 / MK 1) This short guide will show us how to disassemble and replace the collision sensor of the Nissan Rogue Sport, following the instructions below. First,…
Nissan Rogue Sport (2017-2024 / MK 1) In this guide we will see the instructions that will allow us to disassemble and eventually replace the central air vents of the Nissan Rogue Sport, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos