Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on a Nissan Rogue Sport

Model: Nissan Rogue Sport MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Wheel

Video tutorial

To replace the wheel on a Nissan Rogue Sport, start by opening the trunk. Under the trunk floor, grab the wrench to loosen the wheel nuts and the jack with the tool to lift it, and place them near the wheel to be changed.

Now take the wrench and loosen the nuts, position the jack under the vehicle, lift the vehicle, remove the wheel nuts, and take off the wheel itself. Next, take the spare wheel, place it where the flat tire was, and hand-tighten the nuts.

Once the nuts are hand-tightened, lower the vehicle and securely tighten the wheel nuts. Finally, put the jack and tools back under the trunk floor and place the flat tire in the trunk.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to disassemble the central ventilation nozzles of the Nissan Rogue Sport
How to disassemble the central ventilation nozzles of the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) In this guide we will see the instructions that will allow us to disassemble and eventually replace the central air vents of the Nissan Rogue Sport, …
How to Replace the Battery in the Nissan Rogue Sport
How to Replace the Battery in the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) Today, in this brief and simple guide, see how to remove and replace the battery in the Nissan Rogue Sport by following the instructions below. First…
Removing the Front Bumper of the Nissan Rogue Sport
Removing the Front Bumper of the Nissan Rogue Sport
Nissan Rogue Sport (2017-2024 / MK 1) In this brief guide, we will go through the steps to remove and replace the front bumper of the Nissan Rogue Sport. First, open the hood of your vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos