Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Body

Want to perform maintenance on your car? Here’s how to open the bonnet on a Nissan Juke. Pull the lever located at the bottom left of the steering wheel, then lift the bonnet slightly and pull the release lever to the left. Once the bonnet is unlocked: lift it upwards and secure it with the prop rod. Now that the bonnet is open, you can carry out your necessary maintenance. To close the bonnet: remove the prop rod and let the bonnet drop down from a minimal height. Ensure it is properly closed.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of a 2012 Nissan Juke.
How to replace the front headlight bulb of a 2012 Nissan Juke.
Nissan Juke (2010-2019 / MK 1) In the following video tutorial, we are shown how to replace the front headlight bulb of the 2012 Nissan Juke. To perform the replacement, we need to…
Engine Oil Replacement on Nissan Juke
Engine Oil Replacement on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replace the engine oil on a Nissan Juke and the filter. Here's how to do it. Open the car's door and pull up the lever to open the engine compartment…
Where is the fuse box of the Nissan Juke located?
Where is the fuse box of the Nissan Juke located?
Nissan Juke (2010-2019 / MK 1) The Nissan Juke models produced from 2010 to 2019 have two fuse boxes inside. The first fuse box is installed inside the front hood, next to the batt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos