Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Battery on a Nissan Qashqai J11 Without Losing Settings

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Battery

In this video, we will see how to replace the battery on a Nissan Qashqai J11 without losing settings. You will need a battery charger, which will serve as a backup battery: the one recommended by the YouTuber can be found on AliExpress with code 1005005047246942 for £19.94, with free delivery. Here's how to perform this operation. Connect the positive terminal of the charger to the positive terminal of the battery you intend to change, then connect the negative terminal to ground, plug the charger into the mains, and remove the battery, taking care not to disconnect the terminal. Fit the new battery in its place, reconnect the positive terminal, and check if everything is in order.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on the Nissan Qashqai J11
Replacing the Starter Motor on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see the procedure necessary for removing and replacing the starter motor on the Nissan Qashqai J11, second series. First, ope…
Service reset on a Nissan Qashqai J11
Service reset on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this very short tutorial, you will see the entire procedure necessary to reset the service on a Nissan Qashqai, model j11 produced from 2014 to 20…
How to Reset the Service Light on Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) Today, you will learn how to independently perform the operations related to resetting the service light. To reset the light for the service and oil …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos