Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator on a Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Checks and maintenance

To replace the window regulator on a Nissan Micra, fully lower the glass and remove the inner door panel: take out the visible screws, unclip the clips using a plastic lever, and disconnect any electrical connectors for the controls. Remove the plastic cover or insulating sheet that covers the inside of the door. Unclip the glass from the regulator, usually secured with bolts or clamps, and lift the glass to a safe position. Disconnect the electric motor from the regulator if integrated. Unscrew the bolts that secure the regulator to the door and remove it. Position the new regulator in the same housing, secure the bolts, and reconnect the electric motor. Reinsert the glass into the new regulator, check the correct movement, reassemble the cover and the door panel, reconnect the electrical controls, and restore all screws.

Posted on 25 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Micra (2002-2010 / K12) To replace the wiper blades on a Nissan Micra, lift the wiper arms away from the windscreen to the service position. Locate the wiper blade attachmen…
Nissan Micra (2002-2010 / K12) Below are the main steps to remove and replace the rear wiper blade of the Nissan Micra. First, move to the rear of the vehicle and begin to lift the…
Nissan Micra (2002-2010 / K12) Removing the heater control on a Nissan Micra model K12, if necessary, is quite simple. First, remove the centre console using a plastic lever. Once …

    Frequently Asked Questions

    • Micra 2010-2017 - How often should the Nissan Micra be serviced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos