Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Control on a Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

Removing the heater control on a Nissan Micra model K12, if necessary, is quite simple. First, remove the centre console using a plastic lever.

Once the console is removed, unscrew the four screws that secure the radio section and the section for the heater controls. After removing the screws, close the air valve by moving the internal latch, then remove the controls using a screwdriver or plastic lever.

Once you have completed the task, reassemble all the removed parts.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator on a Nissan Micra
How to Replace the Window Regulator on a Nissan Micra
Nissan Micra (2002-2010 / K12) To replace the window regulator on a Nissan Micra, fully lower the glass and remove the inner door panel: take out the visible screws, unclip the cli…
How do you remove the heating fan in the Nissan Micra?
How do you remove the heating fan in the Nissan Micra?
Nissan Micra (2002-2010 / K12) This video guide aims to show the correct steps to disassemble the heating fan, referring to various Nissan cars and not just the Nissan Micra. Here …
Where is the heating resistor located in the Nissan Micra?
Where is the heating resistor located in the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this video, you can see where the heating resistor is located in the Nissan Micra and how to proceed if you need to replace it, a very simple and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos