Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the heating resistor located in the Nissan Micra?

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the heating resistor is located in the Nissan Micra and how to proceed if you need to replace it, a very simple and quick operation. As shown, the resistor is positioned behind the glove compartment on the passenger side.

To replace it, first open the drawer, then empty it and remove it from the dashboard by unscrewing the relevant fixing screws. Next, locate the resistor, disconnect the power connector, and unscrew the single screw.

To fit the replacement, simply follow the reverse procedure.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Fan Resistor on the Nissan Micra K11
How to Replace the Heater Fan Resistor on the Nissan Micra K11
Nissan Micra (1992-2002 / K11) In this video, learn how to replace the heater fan resistor on a Nissan Micra K11: the fan only works at maximum speed. This is a simple and cost-eff…
How to Replace the Cabin Fan Resistor on the Nissan Micra?
How to Replace the Cabin Fan Resistor on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the cabin fan resistor on the Nissan Micra, remove the panel located directly under the steering column. The panel should simply be unclip…
Where to Find the Fuse Box of a 2005 Nissan Micra
Where to Find the Fuse Box of a 2005 Nissan Micra
Nissan Micra (2010-2017 / K13) If you don't yet know where the fuse box is located in your 2005 Nissan Micra K13, don't worry, as this guide will provide you with all the steps to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos