Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery of the 2010 Nissan Murano

Model: Nissan Murano MK 2, Z51 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Today, learn how to remove the battery from the 2010 Nissan Murano independently. To remove the battery, open the front bonnet and remove the air duct.

Using a spanner and a Phillips screwdriver, unscrew the bolts to detach the cover and create more space for the battery replacement. Use a spanner to unscrew the bolt on the battery mounting bracket to extract it after disconnecting the two terminals.

Disconnect the negative terminal connector first, followed by the positive terminal connector. Remove the battery and clean the two terminal cables of any rust.

Insert the new battery and connect the positive terminal first, then the negative terminal. Tighten the nut on the bracket to secure the battery.

Reconnect the filter connector and reinstall the air duct.


Posted on 4 June 2026 by ScegliAuto


Related tutorials

Nissan Murano (2008-2014 / MK 2, Z51) If you are looking for the cabin fuses of your 2012 Nissan Murano, simply read the following guide carefully and follow the described steps. First, o…
Nissan Murano (2003-2008 / Z50, MK 1) In this video, we will cover the main steps to remove and replace the fuel pump on a first-generation Nissan Murano. First, disconnect the battery by…
Nissan Murano (2008-2014 / MK 2, Z51) To replace the battery in your 2012 Nissan Murano key yourself, follow the instructions below for a hassle-free process. First, locate the button on …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Warning Light on the MG HS

When the tyre warning light (TPMS) illuminates on the dashboard of your new MG HS, it means the vehicle's control unit has detected a puncture or abnormal pressures. Below, we will discover what you need to do to quickly and easily eliminate this warning light. First, pay attention to the sticker located on the side of the door and note the recommended tyre pressures, then proceed to inflate or replace the tyres if there is a puncture. At this point, start the car and drive a few miles to force a new data reading.

Watch the video!


by ScegliAuto

More videos