Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : How to replace the license plate light on Nissan Juke

Nissan Juke - Video tutorial

Model: Nissan Juke MK 1 - Years 2010-2019
Part: License plate light
Operation: How to replace the license plate light on Nissan Juke

Replacing the license plate lights on Nissan Juke is a fairly simple job that with a little dexterity shouldn't require the intervention of professionals. First of all, it is advisable to open the rear door halfway to have easier access to the lamp housings. Looking over the plate it will be possible to notice the two lights that hold the lamps, these are fixed by interlocking and it will be enough to pry them on the outermost part to release them from their seat. Once unhooked, the power connector that includes the lamp holder will be visible, this too will be fixed by interlocking and it will be enough to apply a little force to pull it away from its seat. At this point you will have access to the bulb which can be replaced with a new one and then proceed by reassembling everything in the reverse order to that of disassembly.


Posted on 23 November 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos