Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

This guide shows how to replace the remote battery in a Nissan Juke. To perform this operation, you need a small flathead screwdriver. After extracting the physical key using the release on the back of the remote, insert the screwdriver into the two slots provided to open the two halves of the remote.

Remove the old button cell battery and install the new battery in the compartment. Use a CR2025 button cell battery in the housing and close it all up. Check the device's proper functioning.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Nissan Juke remote control.
How to replace the battery of the Nissan Juke remote control.
Nissan Juke (2010-2019 / MK 1) To replace the battery in a remote control for a Nissan Juke, we need to slide the button located on the back of the remote and remove the top part c…
How to Replace the Remote Control Battery of the Nissan Juke?
How to Replace the Remote Control Battery of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the remote control battery of the Nissan Juke, use a small screwdriver to lower the switch on the back of the remote, allowing the key to …
How to Replace the Remote Battery of the Nissan Juke
How to Replace the Remote Battery of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the battery of the Nissan Juke remote is a simple and quick task you can do yourself. To replace the battery, press the button located behi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos