Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : How to replace the engine air filter on a Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Air filter
Operation: How to replace the engine air filter on a Nissan Micra

Let's see how to replace the engine air filter of a Nissan Micra. We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, put it in safety. We open the air kit (release the metal locking hooks on the sides of the box), uncover the filter box cap and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the cap of the air box and tighten the screws. We close the front hood at the end of the maintenance.


Posted on 24 November 2023 by ScegliAuto



Nissan Micra air filter change
Nissan Micra (2002-2010 / K12) In this video tutorial we will show you how to replace the engine air filter of a Nissan Micra third series. First we open the bonnet of our car: we
How to change air filter on Nissan Micra
Nissan Micra (1992-2002 / K11) Let's see the replacement of the air filter of a Nissan Micra. To replace the Micra's air filter we have to lift the front hood where it is positione
How to replace the air filter of the Nissan Micra.
Nissan Micra (2002-2010 / K12) Replacing the air filter of the Nissan Micra K12 is a very simple operation that can be done independently in our own garage. The steps to be taken a

Other guides that may interest you

    Frequently Asked Questions

    • Micra 2002-2010 - Where is the cabin filter in a Nissan Micra K12? Read Answer
    • Micra 2002-2010 - How do you replace the air filter on the Nissan Micra K12? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos