Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Car stereo

Remove the original radio from a Qashqai if you want to replace it. Remove the trim around the ventilation knobs located at the bottom of the stereo. Disconnect the plastic trim along with the air vents and detach it from the centre console. Once the stereo is free from the trims, use a screwdriver to unscrew the securing screws located on either side. Pull the stereo out by hand and disconnect the power and antenna cables. Connect the cables to the new stereo, slide it into the dashboard, and screw in the screws. Secure the radio with the covering trims.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the standard radio of the Nissan Qashqai
Replacement of the standard radio of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today's video tutorial will show us the main instructions on how to disassemble and replace the factory radio of the Nissan Qashqai. First, we get in…
How to remove a stuck CD from the radio of a Nissan Qashqai
How to remove a stuck CD from the radio of a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Is your favorite CD stuck inside your car radio? Don't panic, here is our video tutorial that will explain how to remove the CD without removing the …
How to Remove the Radio from a Nissan Qashqai J10
How to Remove the Radio from a Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) To remove the radio from the dashboard of a Nissan Qashqai J10, it is advisable to disconnect the negative battery cable: use a plastic lever to deta…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to fix DAB radio problems on Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why is the radio of the Nissan Qashqai not working? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos