Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the central console and car radio of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the central console and the car radio of the Nissan Qashqai. First, let's get inside the vehicle and start removing the plastic cover of the climate control buttons by prying it off from the sides; then, we will disconnect the electrical connector found at the back, also removing the air vents.

At this point, let's unscrew the screws of the car radio to remove it, disconnecting the electrical wiring at the back; if necessary, we will replace the multimedia system and reassemble everything!


Posted on 13 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Nissan Qashqai?
How to Replace the Cabin Filter on the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To replace the cabin filter on the Nissan Qashqai, remove the side cover of the centre console on the driver's side. Once the plastic cover is remove…
Dismantling Climate Controls and Radio on a Nissan Qashqai
Dismantling Climate Controls and Radio on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Hello everyone! Today, you will learn how to dismantle the two control panels on the centre console. First, remove the lower trim of the centre conso…
How to Enter the Radio Code for the Nissan Qashqai
How to Enter the Radio Code for the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will learn how to enter the radio code for the Nissan Qashqai, following the instructions provided below. First, turn on …

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to fix DAB radio problems on Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why is the radio of the Nissan Qashqai not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos