Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

To replace the cabin filter on the Nissan Qashqai, remove the side cover of the centre console on the driver's side. Once the plastic cover is removed, you will also need to take off the cover sealing the filter housing.

At this point, the pollen filter can be extracted from its seat and replaced with a new spare part. Close the housing by repositioning the cover removed earlier.

After closing the cover, also install the side cover of the centre console.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Nissan Qashqai
How to Replace the Cabin Air Filter on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) The cabin air filter on a Nissan Qashqai model J10 is located inside the vehicle's cabin, specifically on the left side next to the pedal area. To op…
How to Replace the Cabin Filter on Nissan Qashqai J11
How to Replace the Cabin Filter on Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) How do you replace the car filter? Let's see how to remove the cabin filter from the Qashqai. Open the glove compartment and unclip the end stop arms…
How to Replace the Cabin Air Filter on a Nissan Qashqai?
How to Replace the Cabin Air Filter on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Before starting, enter the cabin of your Nissan Qashqai. Begin by unclipping and removing the cover located at the lower left of the centre tunnel ne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos