Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna of a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Antenna

See other generations:
Video tutorial

In this video, we will see how to replace the antenna of a Nissan Qashqai if it has been stolen or if it is broken. The lack of the antenna affects the sound we can perceive in the car, so we need to replace it. We can find it on the auto-doc. It website with the code 01296 at a cost of 5.44 euros plus 9.95 euros for shipping.

Replacing it is very simple if it has been stolen: just screw it back on and you're done. If it is broken, perhaps in a car wash, we need to first remove the male part that has broken inside the support, and this is not very easy, we need a screw extractor, or drill the screw with a slightly smaller drill bit, so that we can then remove it. At this point, we can then insert the new antenna.


Posted on 11 June 2025 by ScegliAuto


Related tutorials

Replacing the Antenna on Nissan Qashqai 2
Replacing the Antenna on Nissan Qashqai 2
Nissan Qashqai (2014-2022 / J11) In this video, you will see how to disassemble and replace the original antenna with a fin-type antenna on a second-generation Nissan Qashqai, follow…
Guide to Replacing the Antenna on the Nissan Qashqai
Guide to Replacing the Antenna on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today, we will see how to remove and replace the antenna on the Nissan Qashqai, following the instructions below. First, open the bonnet of your car …
How to Replace the Antenna on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the original radio antenna with a shorter one will give the vehicle a more appealing and modern look; when purchasing the new antenna, it c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos