Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : How to replace the rear light bulb on Nissan Note

Nissan Note - Video tutorial

Model: Nissan Note MK 1, E11 - Years 2004-2013
Part: Rear light bulb
Operation: How to replace the rear light bulb on Nissan Note

Are the rear light bulbs damaged? How do we change them? Let's see the disassembly on Nissan Note. We open the tailgate of the luggage compartment, unscrew the tightening screws on the side of the headlight (right) with a screwdriver. We detach the rear light from its housing once all the screws have been removed (disconnect the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the lighthouse with attached screws and reconnect the power supply terminals. We get into the vehicle and operate the light control levers. If the lights don't work, let's take the headlight apart.


Posted on 30 November 2023 by ScegliAuto



How to replace a brake light bulb on Nissan Note
Nissan Note (2004-2013 / MK 1, E11) To replace a brake light bulb on your Nissan Note, follow these simple instructions. First open the boot lid and remove the two screws from the light
How to replace the fog light bulb in Nissan Note?
Nissan Note (2012-2022 / E12, MK 2) To change the fog light bulb in the Nissan Note we must first turn the wheel towards the inside of the car in order to have more working space for th
Nissan Note headlight bulb replacement
Nissan Note (2004-2013 / MK 1, E11) In this video we are going to see how to remove and change the headlight bulb of our Nissan Note. We open the bonnet and carefully remove the plug th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos