Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight and Bumper on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

After positioning the car on a lift or flat surface and securing it, open the front bonnet of the engine compartment. First, unscrew the screws that secure the splash guard inside the left wing.

From here, access the screws that secure the bumper. Unscrew them using the appropriate spanner.

Now, unscrew (using the spanner or suitable screwdriver) the three bolts that secure the headlight unit in place, and after disconnecting the electrical supply to the various components of the headlight, you can remove it from its housing. The operation, shown in the video images, is performed on the left side of the front of the car, but naturally, to remove the bumper, you must repeat it on the left side as well.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Guide to Removing the Front Bumper of the Nissan Qashqai
Guide to Removing the Front Bumper of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today's video will show you the procedure for removing and replacing the front bumper of the Nissan Qashqai in simple steps. First, open the bonnet o…
How to Remove the Front Headlamp of the Nissan Qashqai
How to Remove the Front Headlamp of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will learn how to remove and replace the front headlamp of the Nissan Qashqai in simple and quick steps. First, open the …
How to Replace the Fog Light Bulbs on a Nissan Qashqai?
How to Replace the Fog Light Bulbs on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the fog light bulbs on a Nissan Qashqai, loosen the screws located at the bottom of the bumper on the side corresponding to the bulb to be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos