Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on a Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Center console tunnel

Removing the centre console of the second-generation Nissan Qashqai is a fairly simple task as each element is clipped in place. Start by removing the various elements in the correct sequence. Begin by detaching the side panels of the console by unclipping them at the rear near the gear lever. Next, unclip the trim at the base of the gear lever to lift the front part of the console and then separate it from the trim. Open the glove compartment of the armrest, unclip and remove the chrome cover of the cup holder, and complete the removal of the console.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Centre Console on Nissan Qashqai J11
Removing the Centre Console on Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In today's tutorial video, you will learn how to remove the centre console from a Nissan Qashqai J11, second series, by following the instructions be…
How to Remove the Centre Tunnel of a Nissan Qashqai J11
How to Remove the Centre Tunnel of a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, see how to dismantle the centre tunnel inside the Nissan Qashqai J11: first, remove the side panels, which are simply clipped in. Next…
Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos