Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 Today we will show you how to change the entire rear light housing on a Nissan Qashqai J10. Open the boot lid and unscrew the two side screws that secure the light. Remove the headlight from its seat and disconnect the wiring. While you're at it, lightly clean the rear light connectors and dry them. Obviously, for assembly it will be sufficient to proceed backwards: then connect the connector to the new headlight, place it in its seat and screw the two fixing bolts, using a torque wrench and tightening to 13 Nm (newton per meter).
Posted on 2 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |