Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wing Clips on Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

Hello everyone! Today we will show you how to replace the clip fasteners for the wings on a Nissan Juke in case one or more of them are damaged, or if you want to replace them with stronger ones. Here’s some good news: you won’t need to completely remove the wing itself; just slightly detach it from the rest of the chassis using a large lever and create the necessary space to work on the fasteners.

Once here, use a small flat screwdriver or a small wedge to detach the clips one at a time. Insert the new clips carefully, and finally reattach the wing.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Air Filter on a Nissan Juke
How to Change the Air Filter on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) How to change the engine air filter? Remove the air filter from the Nissan Juke and replace it with a new identical one. Lift the front bonnet and se…
How do you replace the timing belt of the Nissan Juke?
How do you replace the timing belt of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To ensure the replacement of the timing belt of the Nissan Juke, you will need to lift the car so that the right front wheel is not in contact with t…
How to Replace the Front Headlamp Bulbs on a Nissan Juke
How to Replace the Front Headlamp Bulbs on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Open the bonnet by pulling the lever located at the bottom right of the dashboard. Secure it with the provided support rod. Remove the inspection cap…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos