Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Nissan Almera

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Tail light bulb

Open the boot and note that on either side, behind each rear lamp, there is a cover in the inner lining of the boot. Open it and disconnect the connector. Once done, remove the rear cover of the housing where the bulbs are fixed and take it out. At this point, it will be easy to extract the burnt-out bulbs from the housing (by unscrewing slightly) and insert the new ones (by screwing in slightly). Refit the housing at the back of the lamp exactly as you found it, reconnect the connector, and close the cover. Good luck!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the tail lights on the Nissan Almera?
How to replace the tail lights on the Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) In this tutorial, we will see how to replace the rear lights on a Nissan Almera, a process that is extremely simple and quick. First, let's make sure…
How to replace the front headlight bulb of the Nissan Almera N16
How to replace the front headlight bulb of the Nissan Almera N16
Nissan Almera (2000-2008 / N16, MK 2) If one of the bulbs in the front headlight of your Nissan Almera N16 has suddenly stopped working and you want to find out how to replace it quickly …
Replacing the Timing Chain on the Nissan Almera
Replacing the Timing Chain on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Here are the main instructions for replacing the timing chain on the Nissan Almera. First, open the bonnet of your car and start by removing the batt…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos