Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Remove the lower optical group structure by taking off the two 10mm bolts as shown in the video. Now, remove the light unit manually, which is pressed into the frame, without damaging it. Paradoxically, this is the most difficult part: use a plastic trim tool (NOT METAL!) to dislodge the light unit.

At this point, with the light unit in hand (you might disconnect the cable for better access), remove the affected bulb and insert the new one. Before reinserting the light unit structure, grease the three pins to facilitate future removal. Fit it back into the frame and replace the two bolts.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on a Nissan X-Trail
How to Remove the Rear Light on a Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. the rear light and its bulbs on a Nissan X-Trail. First, open the boot lid and start unscrewing the side screws securing the rear light, disconnecting.. …
How to Replace the Rear Light Bulbs on a Nissan X Trail
How to Replace the Rear Light Bulbs on a Nissan X Trail
Nissan X Trail (2014-2023 / MK 3, T32) .. to replace the rear light bulbs on a Nissan X Trail. Open the boot lid, unscrew the fastening screws located at the side of the light (right side)... …
How to replace the license plate light bulb on the Nissan X Trail
How to replace the license plate light bulb on the Nissan X Trail
Nissan X Trail (2014-2023 / MK 3, T32) .. the license plate light bulb of a 2016 Nissan X Trail vehicle. To perform this operation, we need to open the trunk and then, with the help of a flathead.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos