Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulb on the Nissan X Trail

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: License plate light

See other generations:
Video tutorial

Today we will explain how to replace the license plate light bulb of a 2016 Nissan X Trail vehicle. To perform this operation, we need to open the trunk and then, with the help of a flathead screwdriver, remove the cover plate.

Immediately after, we insert a Phillips screwdriver into the side hole of the spotlight to unscrew the internal screw and remove the light. Once the light is removed, disconnect the connector and replace the bulb.

Proceed in the same way with the left spotlight and then assemble everything. This same operation can also be performed on a Nissan Rogue vehicle.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light on the Nissan X Trail
How to Replace the Rear Light on the Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) This guide outlines the steps to remove and replace the rear light on the Nissan X Trail. First, open the boot lid and start unscrewing the two secur…
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) In this new guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of…
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) You can replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos