Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Door Handle on a Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Checks and maintenance

To replace the door handle on a Nissan Qashqai, first remove the cover of the internal grab handle to access the screws hidden beneath it. This will also allow you to remove the cover surrounding the internal handle and the interior panel. Next, remove the internal handle by disconnecting the cable, which will be covered by an additional panel. Now, install the new external handle on the door and connect the new internal handle, fitting it back into the previously removed panel.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) Removing the door panel on a Nissan Qashqai is very simple. For this operation, you will need a plastic trim tool for removing the inserts and a 10 m…
Nissan Qashqai (2014-2022 / J11) To replace the external handle of the Nissan Qashqai, open the corresponding door to detach the circular cover on the outside: beneath this cover, yo…
Nissan Qashqai (2014-2022 / J11) Let's see how to remove the inner lining of the door of the Nissan Qashqai J11. Let's start by removing the cover of the screw located in the inner d…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the oil dipstick on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Why does the cruise control of the Nissan Qashqai not work? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos