Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the light bulb on the mirror on the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Light bulb
Operation: How to replace the light bulb on the mirror on the Nissan Qashqai?

In order to replace the indicator light bulb on the Nissan Qashqai mirror, the glass part must be completely lowered and removed, in order to access the screws below. By loosening these screws, you will be able to detach the outer mirror cover, so that you can access the indicator lamp. By also loosening its two corresponding screws, the latter can be removed by replacing the bulb inside. After the replacement, it will be necessary to mount the indicator lamp and the cap again, screwing everything in with the appropriate screws and covering them by inserting the glass.


Posted on 17 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to replace front bulbs on Nissan Qashqai? Read Answer
    • Qashqai 2021-2028 - Why don't my Nissan Qashqai's interior lights come on? Read Answer
    • Qashqai 2006-2014 - What bulbs does the Nissan Qashqai J10 fit? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos