Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle of a Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

Removing the external handle of a Nissan Qashqai is a very simple and quick operation; let’s see how to proceed in this tutorial. The procedure is valid for any external handle of the car. Open the door where you need to perform the operation, remove the small rubber cap located in the centre of the edge, and using a flathead screwdriver, unscrew the internal screw.

Once done, you can extract the opening lock and remove the handle by pushing it towards the rear of the car, as shown in the video. Fitting the replacement will be just as simple; just follow the same procedure in reverse.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Handle of the Nissan Qashqai?
How to Replace the External Handle of the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the external handle of the Nissan Qashqai, open the corresponding door to detach the circular cover on the outside: beneath this cover, yo…
How to Replace the Door Handle on a Nissan Qashqai?
How to Replace the Door Handle on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To replace the door handle on a Nissan Qashqai, first remove the cover of the internal grab handle to access the screws hidden beneath it. This will …
How to Remove the Tailgate Handle on a Nissan Qashqai
How to Remove the Tailgate Handle on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos