Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on X Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

How do you remove the cabin air filter? Let’s see how to remove the filter located in the glove compartment of the X Trail. Open the glove compartment and unclip the securing clips of the compartment, then remove the entire drawer.

Unscrew the securing screws of the plastic cover with a screwdriver: pull the cover out from inside the dashboard. Remove the plastic cover and slide the air filter out of its housing as shown in the video.

Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier. Secure the plastics and screw in the securing screws.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on Nissan X-Trail 3
How to Replace the Cabin Air Filter on Nissan X-Trail 3
Nissan X Trail (2014-2023 / MK 3, T32) In this new guide, we will help you complete the replacement of the cabin air filter in your Nissan X-Trail third generation. First, park the vehicle…
How to Replace the Air Filter on a Nissan X-Trail
How to Replace the Air Filter on a Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) In this tutorial, you will see how to replace the air filter on a Nissan X-Trail by following some essential steps: first, purchase a new air filter.…
How to Replace Air Filter on Nissan X Trail
How to Replace Air Filter on Nissan X Trail
Nissan X Trail (2007-2014 / MK 2, T31) How to replace the engine air filter on a Nissan X Trail? Let's look at the air filter removal. Lift the front bonnet and secure it, then locate the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos