Do it yourself
| ||||
|
Nissan Terrano - Video tutorial
Model: Nissan Terrano
MK 2, Terrano 2
- Years 1993-2005 To mount a window lifter on a Nissan Terrano II you need a few simple operations that with a little dexterity can be done without too much difficulty. Always remember that to have a job carried out by an expert hand it will be better to contact your trusted mechanic, who will surely be able to solve the problem. As we can see from the video, first disassemble the screws of the metal rod and also those on the upper base. Open the door and remove the top. At this point we see the "skeleton" of our counter. Now fit the rod without screws. Once positioned, replace the screws making sure they are tightly screwed. Each hole corresponds to a screw or bolt. Screw well.
Posted on 2 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |