Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Diesel Injection Pump on the Nissan Terrano

Model: Nissan Terrano Terrano 2, MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuel pump

See other generations:
Video tutorial

In this guide, follow the steps for removing and replacing the diesel injection pump on the Nissan Terrano. First, open the bonnet of your car and start by removing the plastic protective cover and the air filter box; then, dismantle and remove the timing belt by taking off the engine mount and the crankshaft pulley, as shown in the video.

At this point, remove the diesel injection pump by unscrewing the bolts and disconnecting the electrical wiring, following the video tutorial to the end!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Propshaft and Replacing the Universal Joint on a Nissan Terrano
Instructions for Removing the Propshaft and Replacing the Universal Joint on a Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) In this video description, you will see the main instructions on how to remove the propshaft and subsequently replace the universal joint on a Nissan…
How to Replace the Windscreen Wipers of the Nissan Terrano?
How to Replace the Windscreen Wipers of the Nissan Terrano?
Nissan Terrano (1993-2005 / Terrano 2, MK 2) To replace the windscreen wipers of the Nissan Terrano, lift the wiper arm so that the blades are not in contact with the windscreen. Then, lift the …
How to Enter the Radio Unlock Code in the Nissan Terrano
How to Enter the Radio Unlock Code in the Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) In this tutorial, you will see how to enter the radio unlock code in the Nissan Terrano, a necessary operation after disconnecting or replacing the b…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos