Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Nissan Terrano 2

Model: Nissan Terrano Terrano 2, MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Air filter

See other generations:
Video tutorial

If the air filter fitted in your Nissan Terrano 2 is too old and worn, it is time to replace it with a new one. In this mini guide, we will discover the various steps necessary to carry out this operation correctly. Once the engine is switched off, allow it to cool sufficiently, then lift the bonnet.

Locate the filter box, remove the four safety clips, and lift the lid of the box. At this point, remove the old filter and replace it with the new model. Finally, reposition the lid and close the clips.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Nissan Terrano
How to Replace the Engine Oil and Oil Filter on the Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) Below are the instructions that will allow you to perform routine maintenance by replacing the engine oil and oil filter on the Nissan Terrano. First…
How to Replace the Windscreen Wipers of the Nissan Terrano?
How to Replace the Windscreen Wipers of the Nissan Terrano?
Nissan Terrano (1993-2005 / Terrano 2, MK 2) To replace the windscreen wipers of the Nissan Terrano, lift the wiper arm so that the blades are not in contact with the windscreen. Then, lift the …
Guide to Replacing the Diesel Injection Pump on the Nissan Terrano
Guide to Replacing the Diesel Injection Pump on the Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) In this guide, follow the steps for removing and replacing the diesel injection pump on the Nissan Terrano. First, open the bonnet of your car and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos