Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of iPhone, iPod and AUX

Model: Nissan Murano MK 1, Z50 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Accessory kit

See other generations:
Video tutorial

The following guide shows how to add an AUX input to your car and install various devices such as iPhone and iPod. If you do not have enough experience to carry out this work, you can consult a workshop; otherwise, you can proceed. To start, you need to remove the car radio.

You will need three pins and a jack cable. After removing the black protective sheath from the end of the cable, you will notice pins from which different poles will be obtained.

Once the panel is removed, you can connect the pins to the AUX block. Pull the cable out from behind the car radio to connect the various devices for easier use.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Connecting Mobile Phone to USB/iPod Port
Connecting Mobile Phone to USB/iPod Port
Nissan Murano (2014-2024 / Z52, MK 3) To listen to music from your mobile phone or iPod in the car, connect it to the relevant ports located either just behind the gear lever (input numbe…
Removing the External Door Handle on Nissan Murano
Removing the External Door Handle on Nissan Murano
Nissan Murano (2003-2008 / MK 1, Z50) Want to remove the handle from your Nissan Murano but not sure how? Follow these steps to take off the handle and the cylinder. Open the door, remove…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos