Do it yourself
Frequently asked questions about cars and motorcycles

Removing the External Door Handle on Nissan Murano

Model: Nissan Murano Z50, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

Want to remove the handle from your Nissan Murano but not sure how? Follow these steps to take off the handle and the cylinder. Open the door, remove any hole cover caps, and unscrew the screw located on the side of the door using a screwdriver: remove the left or right cover (cylinder) of the handle, then slide the handle out. Remove the door opening handle and insert the new part into the door.

Secure the handle, then fit the lock cylinder or its cover. Finally, screw the handle screw back to complete the installation.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Nissan Murano (2003-2008 / Z50, MK 1) Removing the door panel on a Nissan Murano? Start by removing the covers from the space around the opening lever and from inside the internal handle.…
Nissan Murano (2003-2008 / Z50, MK 1) As shown in this tutorial, removing the rear door handle on a Nissan Murano is a very simple and quick operation. First, open the door in question, t…
Nissan Murano (2003-2008 / Z50, MK 1) This guide covers the removal of the front headlamp from a Nissan Murano. To remove the front headlamp, you must detach the front bumper. Open the bo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos