Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel on Nissan Murano

Model: Nissan Murano Z50, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel on a Nissan Murano? Start by removing the covers from the space around the opening lever and from inside the internal handle. Unscrew the screws located in the upper lever space of the door opening and the screws in the handle.

Remove the trim plastic near the door opening lever, then take out the window switch panel. Pull the panel away with your hands and detach it from the door (disconnect the wiring harness and the opening cable).

Fit a new cover panel over the metal door.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Nissan Murano (2003-2008 / Z50, MK 1) Want to remove the handle from your Nissan Murano but not sure how? Follow these steps to take off the handle and the cylinder. Open the door, remove…
Nissan Murano (2003-2008 / Z50, MK 1) As shown in this tutorial, removing the rear door handle on a Nissan Murano is a very simple and quick operation. First, open the door in question, t…
Nissan Murano (2008-2014 / MK 2, Z51) The following steps will show us how to disassemble and remove the instrument panel of the Nissan Murano. First, we open the front driver's side door…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos