Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Headlamp from a Nissan Murano

Model: Nissan Murano Z50, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight

See other generations:
Video tutorial

This guide covers the removal of the front headlamp from a Nissan Murano. To remove the front headlamp, you must detach the front bumper.

Open the bonnet by pulling the release lever and secure it. Remove the rivets from the plastic cover above the grille, then take off the grille. Undo the securing screws on the headlamp bar using a socket or battery-powered screwdriver.

At this point, you will find additional screws at the bottom of the headlamp; detach the bumper from the side of the wing. Install the new headlamp with new bulbs if damaged.

Secure all mounting pieces near the headlamp.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Nissan Murano (2003-2008 / Z50, MK 1) This guide covers the removal of the bulbs in the rear light of a Nissan Murano (tailgate side). To remove the rear light bulbs, you need to detach t…
Nissan Murano (2003-2008 / Z50, MK 1) Removing the door panel on a Nissan Murano? Start by removing the covers from the space around the opening lever and from inside the internal handle.…
Nissan Murano (2008-2014 / MK 2, Z51) The following steps will show us how to disassemble and remove the instrument panel of the Nissan Murano. First, we open the front driver's side door…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos