Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : Headlight

Nissan Murano - Headlight

Nissan Murano (2008-2014 / Z51, MK 2)
How do you remove the Nissan Murano headlight?
In order to remove the front headlight of the Nissan Murano it is necessary to completely disassemble the front bumper of the car: the latter is fixed to its …read all…
Posted on 17 October 2022 by ScegliAuto
Nissan Murano (2003-2008 / MK 1, Z50)
Removal of the headlight on Nissan Murano
Let's see the disassembly of the headlight of a Nissan Murano. To remove the front headlight of the car you have to unhook the front bumper, let's see how. We …read all…
Posted on 11 February 2024 by ScegliAuto
Cigarette Lighter (1) Car stereo (4) Spark plugs (2) Key (4) -board computer (1) Checks and maintenance (1) Dashboard (1) Headlight (2) Cabin air filter (3) Accessory Kit (2) Rear light bulb (1) Handle (2) Starter motor (1) Gear oil (1) Door panel (1) Brake pads (2) Fuel pump (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos