Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Nissan Murano - Key

Nissan Murano (2014-2023 / MK 3, Z52)
How to replace the battery of the Nissan Murano 3 key
The replacement of the battery inside the key of your Nissan Murano third generation (2014-2023) only takes a few minutes and we will now describe all the …read all…
Posted on 4 May 2024 by ScegliAuto
Nissan Murano (2014-2023 / MK 3, Z52)
How to replace the battery of the Nissan Murano key
If you want to replace the key battery of your Nissan Murano yourself, just follow what is described in our new mini guide. First, locate the small button on …read all…
Posted on 14 June 2022 by ScegliAuto
Nissan Murano (2008-2014 / Z51, MK 2)
How to replace the battery of the Nissan Murano key
If you want to replace the key battery of your 2012 Nissan Murano on your own, just follow the instructions described here and you will have no difficulty. …read all…
Posted on 13 May 2024 by ScegliAuto
Nissan Murano (2014-2023 / MK 3, Z52)
Remote control key battery replacement
The replacement of the remote control key battery is very simple to carry out but the plastic covers must be handled with care to avoid damaging them during …read all…
Posted on 27 August 2023 by ScegliAuto
Cigarette Lighter (1) Car stereo (4) Spark plugs (2) Key (4) -board computer (1) Checks and maintenance (1) Dashboard (1) Headlight (2) Cabin air filter (3) Accessory Kit (2) Rear light bulb (1) Handle (2) Starter motor (1) Gear oil (1) Door panel (1) Brake pads (2) Fuel pump (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos